White Color Strong Adhesion Waterproof Ceramic Tile Adhesive for Floors and Walls
Introduction
BES waerproof ceramic tile adhesive is one kind of rapid-setting flexible adhesive for ceramic, natural stone, porcelain, concrete, screed, plaster, render and plasterboard. Suitable for use on interior and exterior walls, floors and underfloor heating.
Specification
Appearance |
Grey Powder |
Mix ratio |
powder: water=20kg:5liter |
Pot life |
2 hours |
Open time |
20 minutes |
Dislocation adjust time |
30minutes |
Jointing time |
After 24 hours |
Available temperature |
5~40 degrees |
Reference thickness |
3mm |
Dosage |
4~6kg/m2 |
Adhesive strength/(JC-T547-2005) |
>0.5Mpa |
Storage(Sealed) |
store in cool dry place |
Application
-Can be used on substrates that ready for coating and non-shrinking: concrete, cement plaster, concrete panel, and brickwork with plaster directly
-Can be used for water absorption less than 0.5%,Ceramic tile size (≤300*600) mm on the interior wall.
Working Steps
-Keep the surface clean, dry, solid, no oil, no wax and no other rickle.
-Surface with painting should be coursing in advance; at least 75% origin surface should be exposed.
-Tile work after six weeks maintains for the newly paved concrete, at least after 7 days maintains for the newly plastering surface.
-Use the low speed (500r/min) mixer; add the powder into water stirring for 3-5 minutes, forming the even and no powder emulsion.
-Stewing for 5 minutes, and stir again.